The drivers side windshield wiper on my '02 Hyundai Accent has started

Z

zwilldoit

New Member
to slip. I took it off and the seat... ... of the wiper arm appears to be stripped smooth. Shouldn't the seat have small teeth that lock onto the spline of the motor shaft? The good wiper arm (which I also took off) appears to be smooth too. Maybe all I need to do is tighten it real good?
 
L

Leb_scot

Guest
i don't know sorry but thanks for the 2 points good luck though
 
paul h

paul h

Rookie
Should be some splines or keyway to physically connect the two pieces together or they will slip. Take it to a dealer and look at a new one compared to yours....make sure the splines are not stripped also on the wiper stud....usually, the arms strip first being white metal.
 
paul h

paul h

Rookie
Should be some splines or keyway to physically connect the two pieces together or they will slip. Take it to a dealer and look at a new one compared to yours....make sure the splines are not stripped also on the wiper stud....usually, the arms strip first being white metal.
 
You must log in or register to reply here.
Top