Please follow the following steps (In Order) to program your new remotes for 2003-2005 Infiniti G35 Sedan:


Step 1

Close all doors and lock them using the lock button on the DOOR.

Step 2

Insert and remove the key from the ignition 7-10 times till the hazard lights flash. Do not rush this process and make sure that key is inserted and removed completely everytime.

Step 3

Insert key on ignition key cylinder and turn ignition key switch to "AAC" position. Now the system is accepting "new" codes and all the previous codes will be deleted. Press LOCK button on the remote now. Hazard lamp will flash once.

Step 4 – Programming More Than One Remote

Unlock & Lock the doors using the power lock button on the door (Not the Remote). Now Hit LOCK button on the 2nd Remote.

Repeat this process for upto 4 remotes.

Step 5

Remove key from ignition.

Step 6

Unlock driver side door, open drive side door and then close the door.

At this point you should have working remotes!

How useful was this article? Please send feedback to [email protected]